Maximizing Utility
Accurate Repeatability
The Glacern Modular Vise utilizes a patented system of pins and bushings to easily fix the jaws to the vise body. The pins make jaw installation fast, easy, and accurate. To remove the jaws, simply loosen the set screws holding them in place and detatch.
The 6.0-inch "GMV-EAGLE" Modular Vise
Protected by Chip Defender™
Goodbye Chip Guards, Hello Chip Defender.™ Have you ever wished you didn’t need to use those pesky chip guards while machining? With the Glacern Modular Vise, you’ll won’t need to.
Every GMV Vise comes with Chip Defender™ built-in. This new design from Glacern Machine Tools incorporates the leadscrew into a fully sealed vise nut equipped with protective cover plates and military grade O-rings.
Fully encased leadscrew mechanism.
Your GMV Vise comes with a factory assembled screw mechanism that includes two nuts connected by the lead screw. The assembly is pre-lubricated and fully shielded & sealed with military grade O-rings, preventing contaminants such as chips and swarf from entering and clogging the screw. The entire assembly can be quickly removed from the vise body in seconds for simple and fast cleaning.
shielded designencased screw mechanism
Static Footprint
Your Glacern Modular Vise has a static footprint, meaning that nothing will protrude beyond the footprint of the vise. Traditional vises sometimes have parts of the vise protruding, such as the screw, chip guards, endplate, etc. With the GMV, you’ll no longer worry if the vise will collide with your machine’s door or back column. The footprint always stays the same.
Assemble and Disassemble
in Under 5 minutes
The GMV Vise comes fully assembled and ready to place onto your machine. The screw and nut carriage assembly slides out of the body in seconds, and our Rapid Release jaws can be taken on and off effortlessly. The entire vise is designed for easy, fast cleaning - reducing setup times and maximizing productivity.
< 5 min”quick disassembly for cleaning
Performance Meets Convenience
Our vises put 10,000 lbs. of clamping force in the palm of your hand and our durable powder coated finishing enhances your GMV's surface by providing increased rust and corrosion resistance. Rapid Release™ jaws are standard, modular functionality is standard. Every GMV vise comes pre-machined and ready to use with the Cage Lock™ Zero Point Quick Fixturing System. Choose from standard or slim jaw plates, choose between 5/8" or 11/16" cnc vise hardware, choose the classic Square Drive leadscrew or the Hexasquare Drive leadscrew for even more versatility. The possibilitie are endless.