New FM10 High Productivity Facemills
| NEW! FM10 High Productivity Facemills | |||||||||||||||||||||
|
For high feed machining with low cutting depths, the Glacern FM10 Facemill is a very productive roughing tool to use when metal removal is the highest priority.
The 10-degree cutting angle allows the operator to enter the cut with extreme feedrates, directing the cutting forces in the axial direction.
This provides a stable cutting situation with no added vibration tendency.
This cutter excells when using high speed machining strategies, employing high table feed and the chip thinning effect, resulting in high productivity. If you have applications with long or weak setups, this cutter's lower vibration can also be advantageous. The nickel-plated Glacern FM10 has a variety of purposes including face milling, hole making using three axes, ramping, plunge milling, and boring. Made of premium alloy steel and hardened to 35HRC. Screws are included, and replacement screws are available. Compatible with XDLT090408 inserts in general purpose (SP6519) or aluminum (GH2). Inserts sold separately. Features
|
|
||||||||||||||||||||
|
| ||||||||||||||||||||
| FM10 High Feed Facemill + Compatible Facemill Arbors | |||||
| FM10-200 | FM10 Facemill - 2.0in (50mm) |  PHOTO |
$149.99 | IN STOCK | |
| CAT40-FM100-175T | Thru Coolant 1.00 Arbor |  PHOTO |
$119.99 | IN STOCK | |
| CAT40-FM100-400 | Facemill Holder - 1.00 Arbor, 4.0in |  PHOTO |
$103.99 | IN STOCK | |
| R8-FM100 | Facemill Holder - 1.00 Arbor |  PHOTO |
$139.99 | IN STOCK | |
| BT40-FM100-175B | Facemill Holder - 1.00 Arbor Black Oxide |  PHOTO |
$99.99 | IN STOCK | |
| NT40-FM100B | Facemill Holder - 1.00 Arbor Black Oxide |  PHOTO |
$139.99 | IN STOCK | |
| MT3-FM100 | Facemill Holder - 1.00 Arbor |  PHOTO |
$99.99 | IN STOCK | |
Note: More facemill holders in CAT40, R8, BT40, BT30, and NT40 shanks available HERE.
| Inserts for FM10 Facemills | |||||
|
Kennametal XDLT090408-SP6519 (general purpose) and XDLT090408-GH2 (aluminum) carbide inserts with four cutting edges are available for FM10 facemills. Grade SP6519 - General purpose grade, excellent for both roughing and finishing of steels and cast iron. Coolant is optional. Grade GH2 - Uncoated, polished, and ground. These high-positive inserts feature razor sharp edges for maximum productivity in aluminum as well as other non-ferrous metals and plastics. Use with coolant for cutting aluminum. |
|
||||
|
|||||
| FM10 Compatible Carbide Inserts | |||||
| XDLT090408-SP6519 | Kennametal Inserts (pack of 10) | PHOTO |
$199.99 | IN STOCK | |
| XDLT090408-GH2 | Kennametal Inserts (pack of 10) | PHOTO |
$199.99 | IN STOCK | |
