• Free Shipping on Vises is BACK • Online Ordering Available 24/7 •

Signup for email deals

Exclusive savings for subscribers

 

Tungsten Carbide Inserts

Inserts for FM45 Facemills
Kennametal SEHW43-KC510M and Korloy SECA43-PC5300 and SEHT43-X83 carbide inserts with four cutting edges are available for FM45 facemills.

SEHW43 Grade K2885 - General purpose grade, excellent for both roughing and finishing of steels and cast iron. Coolant is optional.

SECA43 Grade PC5300 - General purpose grade, excellent for both roughing and finishing of steels, aluminum, and cast iron. Coolant is optional.

SEHT43 Grade X83 - Uncoated, polished, and ground. These high-positive inserts feature razor sharp edges for maximum productivity in aluminum as well as other non-ferrous metals and plastics. Use with coolant for cutting aluminum.

SEHW43 Grade KC510M - TiAIN coated (PVD) highly wear resistant grade. Great for use with hardened steels (HRC 55+) and can also be used for milling aluminum and high-temp alloys in light machining appliactions.

45 Degree Inserts for Steel
SEHW43-K2885 Kennametal Inserts - Gen Purpose (10 pk) PHOTO $129.99 IN STOCK
 
SECA43-PC5300 Korloy Inserts - Gen Purpose (10 pk) $149.99 IN STOCK
 

45 Degree Inserts for Aluminum
SEHT43-X83 Korloy Inserts - Aluminum (10 pk) PHOTO $179.99 IN STOCK
 

45 Degree Inserts for Hardened Steels
SEHW43-KC510M Kennametal Inserts - HRC55+ (10 pk) PHOTO $239.99 IN STOCK
 

Replacement Screws for FM45 facemills
SEHW43-SCREW Extra Facemill Screw for SE43 PHOTO $2.99 IN STOCK
 


Inserts for EM90 Endmills and FM90 Facemills
Mitsubishi APMT 1604 carbide inserts with two cutting edges are available for FM90 facemills and EM90 endmills.

Grade APGT HTi10 - Aluminum specific (+ nonferrous metals and plastics). Highly polished surface with razor sharp edge. Use with coolant.

Grade F7030 - General purpose grade for all materials. CVD TiN coating resists wear and chipping. Coolant is optional.

Grade VP15TF - Excels in ferrous materials. AlTiN (purple) coating oxidizes at higher temperatures for rock hard coating. Top choice for dry machining.

Grade APMT HTi10 - Cast Iron specific. Coolant is optional.

Size 1135 - (APMT1135/APGT1135) use with EM90-625 5/8" and EM90-750 3/4" endmills

Size 1604 - (APMT1604/APGT1135) use with FM90 facemills and EM90-1000A/EM90-1000B 1" endmills


90 Degree Inserts for Steel
APMT1604-F7030 Mitsubishi Inserts - Gen Purpose (10 pk) PHOTO $139.99 IN STOCK
 
APMT1604-VP15TF Mitsubishi Inserts - Steel (10 pk) PHOTO $139.99 IN STOCK
 
APMT1135-F7030 Mitsubishi Inserts - Gen Purpose (10 pk) PHOTO $139.99 IN STOCK
 
APMT1135-VP15TF Mitsubishi Inserts - Steel (10 pk) PHOTO $139.99 IN STOCK
 

90 Degree Inserts for Aluminum
APGT1604-HTi10 Mitsubishi Inserts - Aluminum (10 pk) PHOTO $159.99 IN STOCK
 
APGT1135-HTi10 Mitsubishi Inserts - Aluminum (10 pk) PHOTO $159.99 IN STOCK
 

90 Degree Inserts for Cast Iron
APMT1604-HTi10 Mitsubishi Inserts - Cast Iron (10 pk) PHOTO $139.99 IN STOCK
 
APMT1135-HTi10 Mitsubishi Inserts - Cast Iron (10 pk) PHOTO $139.99 IN STOCK
 

Replacement Screws for FM90 facemills and EM90 endmills
APMT1604-SCREW-F Extra Facemill Screw for APMT1604 PHOTO $2.99 IN STOCK
 
APMT1604-SCREW-E Extra Endmill Screw for APMT1604 PHOTO $2.49 IN STOCK
 
APMT1135-SCREW Extra Endmill Screw for APMT1135 PHOTO $2.49 IN STOCK
 

Inserts for FM10 Facemills
Kennametal XDLT090408-SP6519 (general purpose) and XDLT090408-GH2 (aluminum) carbide inserts with four cutting edges are available for FM10 facemills.

Grade SP6519 - General purpose grade, excellent for both roughing and finishing of steels and cast iron. Coolant is optional.

Grade GH2 - Uncoated, polished, and ground. These high-positive inserts feature razor sharp edges for maximum productivity in aluminum as well as other non-ferrous metals and plastics. Use with coolant for cutting aluminum.

XDLT090408-SP6519 Kennametal Inserts (pack of 10) PHOTO $199.99 IN STOCK
 
XDLT090408-GH2 Kennametal Inserts (pack of 10) PHOTO $199.99 IN STOCK
 

Inserts for TWIN-BORING-SETS
Mitsubishi TCMT and CCMT carbide inserts with three cutting edges are available in three sizes for TWIN-BORING-SETS.

Grade CCGT and TCGT - Aluminum specific (+ nonferrous metals and plastics). Highly polished surface with razor sharp edge. Use with coolant.

Grade CCMT and TCMT - General purpose grade for all materials. Excels in ferrous materials. AlTiN (purple) coating oxidizes at higher temperatures for rock hard coating. Top choice for dry machining. Coolant is optional.

Size 060 - (CCMT060/CCGT060) use with TWIN-BORING-SET-1 and TWIN-BORING-SET-2

Size 110 - (TCMT110/TCGT110) use with TWIN-BORING-SET-3

Size 16T - (TCMT16T/TCGT16T) use with TWIN-BORING-SET-4 and TWIN-BORING-SET-5


Carbide Inserts for Steel
CCMT060-UE6110 Mitsubishi Inserts - Steel (10 pk) PHOTO $159.99 IN STOCK
 
TCMT110-VP15TF Mitsubishi Inserts - Steel (10 pk) PHOTO $159.99 IN STOCK
 
TCMT16T-VP15TF Mitsubishi Inserts - Steel (10 pk) PHOTO $159.99 IN STOCK
 

Carbide Inserts for Aluminum
CCGT060-HTi10 Mitsubishi Inserts - Aluminum (10 pk) PHOTO $199.99 IN STOCK
 
TCGT110-HTi10 Mitsubishi Inserts - Aluminum (10 pk) PHOTO $199.99 IN STOCK
 
TCGT16T-HTi10 Mitsubishi Inserts - Aluminum (10 pk) PHOTO $199.99 IN STOCK
 

X

Thank You for Subscribing

You're now signed up to receive emails with the latest sales events, exclusive offers, and special announcements from glacern.com

We want to keep in touch, but only if it's helpful to you! Tell us what you like and we'll send you special offers for things that interest you!

X

Thank You for Subscribing

You're now signed up to receive emails with the latest sales events, exclusive offers, and special announcements from glacern.com

We want to keep in touch, but only if it's helpful to you! Tell us what you like and we'll send you special offers for things that interest you!