Tungsten Carbide Inserts
| Inserts for FM45 Facemills | |||||
|
Kennametal SEHW43-KC510M and Korloy SECA43-PC5300 and SEHT43-X83 carbide inserts with four cutting edges are available for FM45 facemills. SEHW43 Grade K2885 - General purpose grade, excellent for both roughing and finishing of steels and cast iron. Coolant is optional. SECA43 Grade PC5300 - General purpose grade, excellent for both roughing and finishing of steels, aluminum, and cast iron. Coolant is optional. SEHT43 Grade X83 - Uncoated, polished, and ground. These high-positive inserts feature razor sharp edges for maximum productivity in aluminum as well as other non-ferrous metals and plastics. Use with coolant for cutting aluminum. SEHW43 Grade KC510M - TiAIN coated (PVD) highly wear resistant grade. Great for use with hardened steels (HRC 55+) and can also be used for milling aluminum and high-temp alloys in light machining appliactions. |
|
||||
|
|||||
| 45 Degree Inserts for Steel | |||||
| SEHW43-K2885 | Kennametal Inserts - Gen Purpose (10 pk) |  PHOTO |
$129.99 | IN STOCK | |
| SECA43-PC5300 | Korloy Inserts - Gen Purpose (10 pk) | $149.99 | IN STOCK | ||
| 45 Degree Inserts for Aluminum | |||||
| SEHT43-X83 | Korloy Inserts - Aluminum (10 pk) |  PHOTO |
$179.99 | IN STOCK | |
| 45 Degree Inserts for Hardened Steels | |||||
| SEHW43-KC510M | Kennametal Inserts - HRC55+ (10 pk) |  PHOTO |
$239.99 | IN STOCK | |
| Replacement Screws for FM45 facemills | |||||
| SEHW43-SCREW | Extra Facemill Screw for SE43 |  PHOTO |
$2.99 | IN STOCK | |
| Inserts for EM90 Endmills and FM90 Facemills | |||||
|
Mitsubishi APMT 1604 carbide inserts with two cutting edges are available for FM90 facemills and EM90 endmills. Grade APGT HTi10 - Aluminum specific (+ nonferrous metals and plastics). Highly polished surface with razor sharp edge. Use with coolant. Grade F7030 - General purpose grade for all materials. CVD TiN coating resists wear and chipping. Coolant is optional. Grade VP15TF - Excels in ferrous materials. AlTiN (purple) coating oxidizes at higher temperatures for rock hard coating. Top choice for dry machining. Grade APMT HTi10 - Cast Iron specific. Coolant is optional. Size 1135 - (APMT1135/APGT1135) use with EM90-625 5/8" and EM90-750 3/4" endmills Size 1604 - (APMT1604/APGT1135) use with FM90 facemills and EM90-1000A/EM90-1000B 1" endmills |
|
||||
|
|||||
|
|||||
| 90 Degree Inserts for Steel | |||||
| APMT1604-F7030 | Mitsubishi Inserts - Gen Purpose (10 pk) |  PHOTO |
$139.99 | IN STOCK | |
| APMT1604-VP15TF | Mitsubishi Inserts - Steel (10 pk) |  PHOTO |
$139.99 | IN STOCK | |
| APMT1135-F7030 | Mitsubishi Inserts - Gen Purpose (10 pk) |  PHOTO |
$139.99 | IN STOCK | |
| APMT1135-VP15TF | Mitsubishi Inserts - Steel (10 pk) |  PHOTO |
$139.99 | IN STOCK | |
| 90 Degree Inserts for Aluminum | |||||
| APGT1604-HTi10 | Mitsubishi Inserts - Aluminum (10 pk) |  PHOTO |
$159.99 | IN STOCK | |
| APGT1135-HTi10 | Mitsubishi Inserts - Aluminum (10 pk) |  PHOTO |
$159.99 | IN STOCK | |
| 90 Degree Inserts for Cast Iron | |||||
| APMT1604-HTi10 | Mitsubishi Inserts - Cast Iron (10 pk) | PHOTO |
$139.99 | IN STOCK | |
| APMT1135-HTi10 | Mitsubishi Inserts - Cast Iron (10 pk) |  PHOTO |
$139.99 | IN STOCK | |
| Replacement Screws for FM90 facemills and EM90 endmills | |||||
| APMT1604-SCREW-F | Extra Facemill Screw for APMT1604 |  PHOTO |
$2.99 | IN STOCK | |
| APMT1604-SCREW-E | Extra Endmill Screw for APMT1604 |  PHOTO |
$2.49 | IN STOCK | |
| APMT1135-SCREW | Extra Endmill Screw for APMT1135 |  PHOTO |
$2.49 | IN STOCK | |
| Inserts for FM10 Facemills | |||||
|
Kennametal XDLT090408-SP6519 (general purpose) and XDLT090408-GH2 (aluminum) carbide inserts with four cutting edges are available for FM10 facemills. Grade SP6519 - General purpose grade, excellent for both roughing and finishing of steels and cast iron. Coolant is optional. Grade GH2 - Uncoated, polished, and ground. These high-positive inserts feature razor sharp edges for maximum productivity in aluminum as well as other non-ferrous metals and plastics. Use with coolant for cutting aluminum. |
|
||||
|
|||||
| XDLT090408-SP6519 | Kennametal Inserts (pack of 10) | PHOTO |
$199.99 | IN STOCK | |
| XDLT090408-GH2 | Kennametal Inserts (pack of 10) | PHOTO |
$199.99 | IN STOCK | |
| Inserts for TWIN-BORING-SETS | |||||
|
Mitsubishi TCMT and CCMT carbide inserts with three cutting edges are available in three sizes for TWIN-BORING-SETS. Grade CCGT and TCGT - Aluminum specific (+ nonferrous metals and plastics). Highly polished surface with razor sharp edge. Use with coolant. Grade CCMT and TCMT - General purpose grade for all materials. Excels in ferrous materials. AlTiN (purple) coating oxidizes at higher temperatures for rock hard coating. Top choice for dry machining. Coolant is optional. Size 060 - (CCMT060/CCGT060) use with TWIN-BORING-SET-1 and TWIN-BORING-SET-2 Size 110 - (TCMT110/TCGT110) use with TWIN-BORING-SET-3 Size 16T - (TCMT16T/TCGT16T) use with TWIN-BORING-SET-4 and TWIN-BORING-SET-5 |
|
||||
|
| ||||
| Carbide Inserts for Steel | |||||
| CCMT060-UE6110 | Mitsubishi Inserts - Steel (10 pk) | PHOTO |
$159.99 | IN STOCK | |
| TCMT110-VP15TF | Mitsubishi Inserts - Steel (10 pk) |  PHOTO |
$159.99 | IN STOCK | |
| TCMT16T-VP15TF | Mitsubishi Inserts - Steel (10 pk) | PHOTO |
$159.99 | IN STOCK | |
| Carbide Inserts for Aluminum | |||||
| CCGT060-HTi10 | Mitsubishi Inserts - Aluminum (10 pk) | PHOTO |
$199.99 | IN STOCK | |
| TCGT110-HTi10 | Mitsubishi Inserts - Aluminum (10 pk) |  PHOTO |
$199.99 | IN STOCK | |
| TCGT16T-HTi10 | Mitsubishi Inserts - Aluminum (10 pk) |  PHOTO |
$199.99 | IN STOCK | |
